VW APPLICATIONS
#1 in VW Suspension Components
Sway-A-Way's history of off road performance excellence has established it as a leader among racing professionals. From Trophy trucks to hard driving buggies, Sway-A-Way stands out for its dedication to designing and manufacturing the finest suspension and drive line components available. With its RaceRunner shock series, Sway-A-Way has redefined the highest standards for racing shocks, making them a perfect complement to their race proven anti-sway bars, torsion bars, axles and suspension components.
- Superior Design and Engineering
- Over 30 Years Experience in Hard-core Racing
- ISO 9000 Manufacturing Quality
- Dedicated to Performance
Whatever performance vehicle you're driving off road or street, Sway-A-Way components let you realize the highest performance. Get with the leader in suspension technology. Handle it with Sway-A-Way!
AXLE LENGTH MEASUREMENT INSTRUCTIONS
 VW Front Torsion Leave Adjusters - 2008 Prices
Quality American made Front Leaf Spring Adjusters allow approximately 2” of adjustment either up or down on the front end (4” Total) The strong construction allows you to set your ride height where you want. Lower it for the CA bug look or raise it for extra ground clearance for your Baja bug. These units are welded in, and are available for link in front ends. Racing adjusters designed with a larger 4130-spring disc and bigger setscrews are available for the link pin front ends.
| DESCRIPTION |
PART No. |
MSRP |
| Beam Kit, Small Disc Link Pin |
6311 |
$45.00 |
| King Kong Racing Adjuster |
6330 |
$55.00 |
| Beam Kit, King Kong Small Disc (1.745” Dia.) |
6331 |
$55.00 |
 VW Axle Applications
Available in 2 grades of high quality aircraft alloy steel, these axles are heat-treated and center less ground for a smooth consistent finish. The end dia. has been maximized to get the most face contact possible, minimizing wear between the axle and cv. The spine length has been increased to 2 _” – 3” to allow the cv to float on the axle. The center part of the axle is sized to twist like a torsion bar under heavy loads absorbing a large portion of the shock transmitted from the wheel to the gearbox.
VW/Porsche 356 Axles - 2008 Prices
These axles are crafted from forged aircraft alloy steel, precision machined, heat treated and center less ground for a smooth finish. The middle dia. of these axles are not tapered like stock axles, instead the middle diameter is consistent all the way to the spline permitting the axle to twist under heavy loads, helping to prevent transaxle breakage. |
|
| VW/Porsche 356 Swing Axle Applications |
| Length |
Year/Model |
Description |
Part No. |
MSRP |
| 26 11/16" |
61-66 Bug |
Short Spline |
2260 |
$295.00 |
| 23 11/16" |
Drag Cars, 3" Shorter Than Stock |
Short Spline |
2261 |
$390.00 |
| 21 11/16" |
Drag Cars, 5" shorter Than Stock |
Short Spline |
2262 |
$390.00 |
| 27 11/16" |
1967 Bug |
Short Spline |
2265 |
$295.00 |
| 28 7/16" |
1968 Bug & Type III |
Long Spline |
2270 |
$310.00 |
Axles VW Type I, II, III - 2008 Prices
| VW 33 Tooth Axles, 2 3/8" Long Spline, Type I, II, III |
| Description |
Length |
Part # |
MSRP |
| Conversion, IRS Bug Trans In Bug Chassis |
15 5/8" |
2015 |
$210.00 |
| Replaces Stock Axles In Bug Chassis |
16 1/4" |
2016 |
$210.00 |
| Racing Applications |
16 3/4" |
2016-7 |
$219.00 |
| Bus Trans With 3" Longer Trailing Arms |
17 1/4" |
2017 |
$219.00 |
| Bug Trans, Stock Length Arms, 5 3/4" Rear Section |
18 3/4" |
2018 |
$219.00 |
| Bus Trans, 3" Longer By 3" Wider Arms, Stock Rear |
19 1/4" |
2019 |
$248.00 |
| Racing Applications |
20 1/4" |
2020 |
$248.00 |
| Racing Applications |
22" |
2022 |
$248.00 |
| Spiroloc Circlip, For 33 Spline VW Axles, Each |
NA |
2410 |
$1.40 |
|
|
|
Axles, Porsche 930 28 Tooth - 2008 Prices
| Porsche 930 28 Tooth Axles, 3" Long Spline |
| Description |
Length |
Part # |
MSRP |
| Special Order Porsche Axle Set |
Special |
2400 |
$625.00 |
| Spiroloc Circlips For Porsche 930 Axles, Each |
NA |
2411 |
$1.40 |
| Porsche 930 Axle Set, 15 5/8" Long |
15 5/8" |
2415 |
$285.00 |
| Porsche 930 Axle Set, 16 1/4" Long |
16 1/4" |
2416 |
$285.00 |
| Porsche 930 Axle Set, 16 3/4" Long (5-16 cars) |
16 3/4" |
2416-7 |
$305.00 |
| Porsche 930 Axle Set, 17 1/2" Long |
17 1/2" |
2417 |
$305.00 |
| Porsche 930 Axle Set, 18 3/4" Long |
18 3/4" |
2418 |
$305.00 |
| Porsche 930 Axle Set, 19 1/4" Long |
19 1/4" |
2419 |
$305.00 |
| Porsche 930 Axle Set, 20 1/4" Long |
20 1/4" |
2420 |
$305.00 |
| Porsche 930 Axle Set, 21 3/8" Long |
21 3/8" |
2421 |
$310.00 |
| Porsche 930 Axle Set, 22" Long |
22" |
2422 |
$310.00 |
| Porsche 930 Axle Set, 22 1/2" Long |
22 1/2" |
2422.5 |
$310.00 |
| Porsche 930 Axle Set, 23" Long |
23" |
2423 |
$310.00 |
| Porsche 930 Axle Set, 24" Long |
24" |
2424 |
$320.00 |
| Porsche 930 Axle Set, 25" Long |
25" |
2425 |
$320.00 |
| Porsche 930 Axle Set, 26" Long |
26" |
2426 |
$320.00 |
| Porsche 930 Axle Set, 27" Long |
27" |
2427 |
$320.00 |
| Porsche 930 Axle Set, 28" Long |
28" |
2428 |
$350.00 |
| Porsche 930 28 Tooth, 3" Long Spline, Racing Axles |
| Description |
Length |
Part # |
MSRP |
| Racing Applications |
16 9/16" |
32416 |
$525.00 |
| Racing Applications (5-16 cars) |
16 3/4" |
32416-7 |
$525.00 |
| Bus Trans, 3" Longer By 3" Wider Arms, Stock Rear |
19 1/4" |
32419 |
$525.00 |
| Racing Applications |
20 1/4" |
32420 |
$525.00 |
| Racing Applications |
21 3/8" |
32421 |
$575.00 |
| Racing Applications |
22" |
32422 |
$575.00 |
| Racing Applications |
23" |
32423 |
$575.00 |
| Racing Applications |
24" |
32424 |
$605.00 |
| Racing Applications |
25" |
32425 |
$605.00 |
| Racing Applications |
26" |
32426 |
$605.00 |
| Racing Applications |
27" |
32427 |
$605.00 |
| Racing Applications |
28" |
32428 |
$605.00 |
| Racing Applications |
29" |
32429 |
$605.00 |
| Racing Applications |
29 1/2" |
32429.5 |
$605.00 |
| Special Order 28 Spline Axle Set, Racing |
Any |
32400 |
$750.00 |
| Cut Fee for Pair of Axles, Racing Applications |
N/A |
32401 |
$155.00 |
| 930 C.V. Porsche Axle Set with Bubble, 28 Tooth |
Any |
32402 |
$770.00 |
| Spiroloc Circlips For Porsche 930 Axles, Each |
|
2411 |
$1.40 |
Axles, Porsche 934 33 Tooth
| Porsche 934 33 Tooth, 3" Long Splines, Racing Axles |
| Description |
Length |
Part # |
MSRP |
| Axle Set, 934 CV'S, 27" Long, 33 Tooth |
27" |
32727 |
$770.00 |
| Axle Set, 934 CV'S, 28" Long, 33 Tooth |
28" |
32728 |
$770.00 |
| Axle Set, 934 CV'S, 29" Long, 33 Tooth |
29" |
32729 |
$770.00 |
| Porsche 934 33 Tooth, 6" Long Splines, Racing Axles |
| Description |
Length |
Part # |
MSRP |
| Axle Set, 934 CV'S, 30" Long, 33 Tooth |
30" |
32730 |
$770.00 |
| Axle Set, 934 CV'S, 32" Long, 33 Tooth |
32" |
32732 |
$770.00 |
| Axle Set, 934 CV'S, 34" Long, 33 Tooth |
34" |
32734 |
$770.00 |
| Axle Set, 934 CV'S, 36" Long, 33 Tooth |
36" |
32726 |
$770.00 |
| Special Order Axles Set 33 Spline for 934.5 CV's, No Bubble |
Any |
32700 |
$1,100.00 |
| Special Order Axles Set for 934.5 with Dome Ends |
Any |
32700-1 |
$1,100.00 |
| Special Order Axles Set For 935 CV's |
Any |
32700-1B |
$1,100.00 |
| Special Order Axles Set for 934.5 with Bearings Surface:
Dome or 1/2 Dome
|
Any |
32701 |
$1,200.00 |
| Special Order Axles Set for 934.5 with Dome Ends & Torque Bubble |
Any |
32702 |
$1,250.00 |
| Circlip Set For 33 Spline 934.5 Axles |
Any |
2409 |
$1.20 |
|
|
 VW Axle Spacer Kits - 2008 Prices
These kits are designed to replace the stock spacers in swing axle and IRS applications. They are made from heat-treated alloy steel to resist crushing which causes loose axle nuts.
| DESCRIPTION |
PART No. |
MSRP |
| Swing Axles Spacers |
2201 |
$59.00 |
| IRS Axle Spacers |
2202 |
$81.00 |
|
|
|
|
