818-700-9712

SMOOTH   YOUR RIDE
Max your flow

Sway-A-Way has engineered the smoothest rides for almost 30 years. We've got it down. We have the know how. You only need to take advantage of it.

SHOCK DESCRIPTIONS    PAGE  1  |  2  |   3    AND SHOCK PARTS
 

3.0" Shocks
Sway-A-Way 3.0” Shocks are designed for racing and hard pre running applications including off-road buggies, pre runners, desert and short course trucks. These rebuild able and re valve able shocks are available in remote reservoir, piggy back and bypass designs. Both the piggyback and the bypass designs feature a top that allows it to swivels 360 degrees for easy fitment.  Bypass shocks are available in right and left hand designs. Shock travel ranges from 8” to 18” in 2” increments.

All 3.0” shocks come standard with bright silver cadmium plated cylinders and high strength 1” Nitro Steel shafts that are chip and rust resistant. All shock cylinders are threaded for both single & dual rate applications, and use standard 3 5/8” I.D. coil springs. Coil over kits can be added for coil spring applications

Shocks come standard with high strength Com 12 Teflon lined steel spherical bearings on each end with 304 stainless spacers. All aluminum parts are red anodized. Standard nitrogen pressure is 200 PSI for all shocks. Spacers are 1.50 wide in the ends and use ½” bolts.

3.0" Race Series Competition Shocks
Now available from Sway-A-Way, the original Kuster shock design with internally threaded cylinders. Designed for short course and the desert, these shocks are designed with top caps and the seal caps that thread into the inside of the cylinder for maximum strength. 1” and 1 1/8” shafts are available for different applications.

3.0" Remote Reservoir Shocks

3.0" Three Tube  Bypass Shocks

4.0" Six Tube Bypass Shocks
Hard core Sway-A-Way 4.0” Bypass Shocks are designed for the rear of Class 1 buggies and all around on off road racing trucks. These shocks are manufactured using an innovative design which allows the shock body to rotate 360 degrees for ease of installation and eliminates the need for left and right specific shocks. Remote reservoir and piggy back designs are available.

These shocks feature Com-14 Teflon lined steel spherical bearings, industries first 1 1/4” Nitro Steel shaft that will not chip or rust, and bright silver cadmium plated cylinders. Sway-A-Way 4.0” Bypass Shocks are custom built to order, which allows for specific placement of 4 compression tubes and 2 rebound tubes for position sensitive tuning and are ideal for Class 1, Class 8, Trophy Trucks & off-road buggies.

4.0” Bypass Shocks

Shock Travel	Extended Length	Compressed Length	Part Number, Remote Reservoir	Part Number, PB Reservoir	MSRP
14”			59000-114-6	59000-314-6	$2,310.00 / $2,310.00
16”			59000-116-6	59000-316-6	$2,310.00 / $2,310.00
18"	50.93"	32.93"	59000-118-6	59000-318-6	$2,310.00 / $2,310.00
20"	54.93"	34.93"	59000-120-6	59000-320-6	$2,310.00 / $2,310.00
22"	58.93"	36.93"	59000-122-6	59000-322-6	$2,310.00 / $2,310.00

SHOCK DESCRIPTIONS    PAGE  1  |  2  |  3    AND SHOCK PARTS